关于我们  |  新闻中心  |  工程案例  |  产品展示  |  联系我们
  工程案例
 
 
上海世博会工程——不锈钢复合板包柱

    上海世博会是继北京奥运会之后我国举办的又一次世界瞩目的盛大活动。上海世博工程要求以高质量、高标准、高效率地完成世博会各项重大工程建设任务。广大参建企业将技术创新融入世博会场馆建设之中,使世博工程的综合建设技术达到了国际先进水平。上海庞贝金属装饰工程有限公司有幸为此次大会添砖加瓦,我们凭借雄厚的技术力量、良好的企业信誉、本着高度的社会责任感为本次盛会尽心服务。

    庞贝金属装饰工程有限公司承接世博中心不锈钢金属制品制作安装工程,工程采用的不锈钢镜面复合板是我公司为世博工程精心研发设计的新产品、新技术、新工艺。根据世博局提出的“学习人民大会堂、赶超人民大会堂”的技术理念,要求在大走廊中做8.4m高度约三层楼高的镜面不锈钢饰面板,要求成品后饰面达到浮法镜子的影像效果,我公司组织专门攻关小组,从材料选用、镜面研磨剂配方、背架选用、包装、运输,大板面安装等各道工序,各个环节逐一攻克每个难关,先后采用钢板复合、玻璃复合等各种试验,最后选用δ2.0不锈钢镜面板+δ35┨铝蜂巢板+δ2.0铝板复合而成。不锈钢复合板作为一种资源节约型的产品,减少贵重金属的消耗,大幅度降低工程造价,实现低成本和高性能的完美结合,有良好的社会效益,该大板面不锈钢复合板在国内属首创,在国际上达到领先地位。

    在大走廊8.4m墙面与5.6m吊顶上采用镜面不锈钢饰面后,当观众进入驻足而视时,会有一种惊叹感,影像的通透性会产生极大的震撼力。

    进入世博中心大堂,映入眼帘的首先是一~七层高的不锈钢饰面钢柱。36m高的钢柱四面全由油发不锈钢复合板包覆,为提高技术含量,摈弃传统的角码+硅胶施工工艺,从节点设计入手,经过多次试样,目前4个柱面均为密缝拼接,垂直度<3┨、平整度<2‰、板向高差<1┨,做好后的成品给人一种自然遐想,就像卓别林不知道中国人是如何将馅心放入汤圆内一样。这么高的柱,这么大的板面,是如何密缝拼缝的,给人一种玄妙的好奇感觉,进而成为世博工程闪亮点。

    通过我们的精心设计、精心制作、精心施工,为世博工程增加一道新的美丽风景线、达到“挑战极限、体现国力“之目的。

2010 Shanghai Expo is another important activity held in China following The Beijing Olympic Games. It’s required to complete the onstruction with high quality, high standard and high efficiency. The Expo
venue was built by innovated technology, which helped the whole construction reaching the advanced international level. Shanghai Pangbei Metal Decoration Engineering Co., Ltd. has the honor of joining in the building of Expo by its
strong technical force, good reputation and high social responsibility.

The company makes the stainless steel products and the installation of the Expo center. The mirror stainless steel compound board used in the building is newly developed and designed by our company, which is awarded the title of “The energy-saving and environment protecting new material in the 2010 Shanghai EXPO building”. The Expo Bureau required furnishing the wall of 8.4 meters height with mirror stainless steel board and reaching an effect of floated mirror image. Our company processed lots researches and finally successes in the method of compounding the δ2.0 mirror stainless steel plate + δ35 mm aluminum composite honeycomb panel + δ2.0 aluminum board. This kind of compound board is a resource-saving product, which reduce the consumption of precious metal. This new product achieves the perfect combination of low-cost and high performance, which brought good social benefit. This kind of material is a domestically new technique and reaches the first international level.

The 8.4 meters height corridor and 5.6 meters ceiling are decorated by mirror stainless steel board, which will give the visitors a remarkable impression because of the permeability of the image. The visitors will first see a stainless steel pole in he EXPO Center Hall, the pole is 36 meters high and fully coated with stainless steel compound board. In order to enhance the techniques from tradition, we studied at the method of jointing, through many times testing we finally achieve a standard tolerance in vertical<3mm and flatness <2 ‰. The four plates are close seam stitching, difference between plates are within 1mm.
The whole product is just like a work of the nature, because people don’t know that mankind can make a so tall and large cylinder.

We are trying our best to build new beautiful scenery for the Expo by considerate design, well workmanship and furnishing

 
 世博会——世博中心馆中心大堂
 世博会——世博中心馆绿色大厅
 世博会——世博中心馆蓝色大厅
 武汉万达广场工程
 SOHO中国工程
 世博会——世博中心馆宴会厅
 上海世博会工程——不锈钢复合板包柱
 
首 页  |  关于我们  |  新闻中心  |  工程案例  |  产品展示  |  联系我们
版权所有©2003-2015 庞贝金属装饰有限公司 沪ICP备10214630